AFTER
BEFORE
This was my very first attempt to use HTS-2000.
I used a nut, bolt and two washers to act as a former and built up the braze around them. When cool I unscrewed the nut, unbolted the bolt from the cover (it had formed a thread which was then removed by running a drill through the hole), then cleaned up the profile with a file and finished off by polishing it.
I used a nut, bolt and two washers to act as a former and built up the braze around them. When cool I unscrewed the nut, unbolted the bolt from the cover (it had formed a thread which was then removed by running a drill through the hole), then cleaned up the profile with a file and finished off by polishing it.